Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > copy affinity-group
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
256
copy affinity-group
This command copies information from one affinity group to another affinity group.
■
Syntax
■
Parameter
■
Example(s)
copy affinity-group -name
name
{-source-ag-number
source_ag_number
| -source-ag-name
source_ag_name
}
-name
This parameter specifies the affinity group name of the target affinity group. Only one name
can be specified at the same time.
-source-ag-number
or
-source-ag-name
This parameter specifies the affinity group identifier which is the source of the copy. Only one
affinity group can be specified at the same time. For details, refer to
.
The following example copies the definitions contained in the affinity group named "AG001", and creates a
new affinity group named "AG002" with those same definitions:
CLI> copy affinity-group -name AG002 -source-ag-name AG001
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......