Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
35
Cache Mode
The cache control mode (Write Back Mode or Write Through Mode)
Remote Support
The remote support state (Operating, Maintenance, Stopping, or Not yet Set)
Stopping indicates a temporarily stopped status.
Operation Mode
The operation mode (Maintenance mode or normal operation mode)
CLI Connecting Controller Module
Controller module that has an active CLI connection.
Firmware Version
Current firmware version
Controller Enclosure
Controller enclosure status
Drive Enclosure #n
Indicates the number of the drive enclosure and its status
Example: Drive Enclosure #1 [ status ]
(giving the status of drive enclosure)
System Message
Messages that identify the error events that have occurred in the system.
The following information is output for the controller enclosure components:
Intake Temp
Intake temperature status, status code, and intake temperature values. Each controller has
two redundant intake temperature sensors, and both temperature values is displayed in
Celsius. If a sensor fails, "Failed" is displayed.
Exhaust Temp
Exhaust temperature status and the status code.
Note that exhaust temperature values are not displayed.
CM#n
Controller Module # status and the status code. The "#n" in the field indicates the controller
module number.
Example: CM#1 [Status / Status Code]
(For controller module#1)
FRT#n
Front End Router status and the status code (only for the ETERNUS DX8700 S2). The "#n" in the
field indicates the Front End Router number.
Example: FRT#1 [Status / Status Code]
(For Front End Router#1)
BRT#n
Back End Router status and the status code (only for the ETERNUS DX8700 S2). The "#n" in the
field indicates the Back End Router number.
Example: BRT#1 [Status / Status Code]
(For Back End Router#1)
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......