Chapter 4 Function/System Settings and Display
4.3 Network Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
531
The following figure shows how to register the certificate:
■
Non-interactive CLI command execution
Use of SSH public key authentication enables non-interactive (scriptable) CLI command execution.
Perform the following procedure to execute the CLI command interactively:
Procedure
1
Create a key pair for SSH authentication in a client.
2
Convert the created public key file into IETF format.
3
Register the public key in the ETERNUS DX Disk storage system.
4
Check that CLI is available in the ETERNUS DX Disk storage system by using the public key
authentication.
5
Execute a CLI command using a here document in the SSH client.
End of procedure
Settings state when ships
from factory.
No Certificate
Generate and export CSR (*1)
Send CSR to provider.
Receive signed certificate.
Register signed certificate.
Allow https access
Certificate
(self- or provider-signed)
*1:
Certification Signing Request
Issue self-signed certificate.
Cannot access with https
When registering a
self-signed certificate.
In case of register
certificate signed by provider.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......