Chapter 4 Function/System Settings and Display
4.3 Network Management > show event-notification
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
522
show event-notification
This command displays the parameters that have been set for event notification.
■
Syntax
■
Parameter
No parameters.
■
Output
show event-notification
# [Severity: Error Level] E-mail SNMP Host REMCS syslog AIS Connect
# Parts Error Notify Notify Notify(OPMSG) - Do not notify Notify
A B C D E F
# . . .
# Disk Error Notify(HS<0) Notify(HS<0) Notify(HS<0,OPMSG) - Do not notify Notify(HS<0)
G H
A:
It indicates whether it is notified by
, or not.
B:
It indicates whether it is notified by SNMP trap, or not.
C:
It indicates whether it is notified by Host sense, or not. Also, it means host sense as OPMSG.
D:
It indicates whether it is notified by REMCS, or not.
E:
It indicates whether it is notified by syslog, or not.
F:
It indicates whether it is notified by AIS Connect, or not.
G:
It indicates conditions when there was no hot spare in the system.
H:
It indicates conditions when there was no hot spare in the system. Also, it means host sense as OPMSG.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......