Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > create thin-pro-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
75
-capacity
Optional. This parameter specifies the disk capacity that is used to create a RAID group. This
parameter can only be specified when "-rg-mode auto" is selected.
-disks
Optional. This parameter specifies which disks are used to configure the RAID group. This
parameter can only be specified when "-rg-mode manual" is selected. One or more disks can
be specified at the same time. For details, refer to
.
-assigned-cm
Optional. This parameter specifies the assigned controller for the specified RAID group. This
parameter can only be specified when "-rg-mode manual" is selected. If "auto" is specified, the
fixed controller, which is calculated automatically by the system, is assigned. If this parameter
is omitted, "auto" mode is selected.
For the ETERNUS DX80 S2/DX90 S2:
0
Controller module #0
1
Controller module #1
auto
Automatically (default)
For the ETERNUS DX410 S2/DX440 S2 and ETERNUS DX8100 S2:
cm0cpu0
Controller module#0 CPU#0
cm0cpu1
Controller module#0 CPU#1
cm1cpu0
Controller module#1 CPU#0
cm1cpu1
Controller module#1 CPU#1
auto
Automatically (default)
For the ETERNUS DX8700 S2:
cm0cpu0
Controller module #0 CPU#0
cm0cpu1
Controller module #0 CPU#1
cm1cpu0
Controller module #1 CPU#0
cm1cpu1
Controller module #1 CPU#1
cm2cpu0
Controller module #2 CPU#0
cm2cpu1
Controller module #2 CPU#1
cm3cpu0
Controller module #3 CPU#0
cm3cpu1
Controller module #3 CPU#1
cm4cpu0
Controller module #4 CPU#0
cm4cpu1
Controller module #4 CPU#1
cm5cpu0
Controller module #5 CPU#0
cm5cpu1
Controller module #5 CPU#1
cm6cpu0
Controller module #6 CPU#0
cm6cpu1
Controller module #6 CPU#1
cm7cpu0
Controller module #7 CPU#0
cm7cpu1
Controller module #7 CPU#1
auto
Automatically (default)
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......