Chapter 4 Function/System Settings and Display
4.3 Network Management > set email-notification
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
507
-authentication
Optional. This parameter specifies the authentication method of the SMTP server. If omitted,
the existing setting is not changed.
none
The system connects to the SMTP server without authentication.
auto
The system connects to the SMTP server using AUTH SMTP authentication and
automatically selects the appropriate authentication method from "cram-md5",
"plain" or "login".
cram-md5
The system connects to the SMTP server using AUTH SMTP authentication and
uses "cram-md5" as the authentication method.
plain
The system connects to the SMTP server using AUTH SMTP authentication and
uses "plain" as the authentication method.
login
The system connects to the SMTP server using AUTH SMTP authentication and
uses "login" as the authentication method.
-user
Optional. This parameter specifies the user account name to connect to the SMTP server using
AUTH SMTP authentication. This command displays a password prompt. When "-authentication
none" is specified, this parameter is unnecessary. If omitted, the existing setting is not
changed.
-from
Optional. This parameter specifies the "from address" field of E-mail sent from the system. If
omitted, the existing setting is not changed.
-to1
-to2
-to3
-to4
-to5
Optional. This parameter specifies up to 5 e-mail addresses sent from the system. If any
parameter is omitted, the corresponding value is not changed.
You can delete an address by specifying double quotation characters consecutively.
Example: -to2 ""
-text-count Optional. This parameter specifies the number of valid message lines. The fixed message is
output according to the specified one. Although this command is optional, it must be specified
when the fixed message is modified.
When 0 is specified, the fixed message is deleted.
-text1
. . .
-text10
Optional. These parameters specify the fixed lines of the E-mail messages. The maximum
number of lines is 10 and the maximum size is a total of 255 bytes. The system sends the
message from the "-text1" parameter to the last parameter that is not blank as consecutive
messages. If any parameter is omitted, the corresponding value is not changed.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......