Chapter 3 Configuration Settings and Display
3.4 Volume Management > stop migration
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
167
stop migration
This command can be used to stop the RAID migration progress if it has commenced. The migration source/
destination volumes cannot be deleted unless the RAID migration has been stopped or has completed.
This command is also used for RAID Migration in which the destination is a Flexible Tier Pool (FTRP).
■
Syntax
■
Parameter
■
Example(s)
stop migration {-volume-number
volume_numbers
| -volume-name
volume_names
}
-volume-number
or
-volume-name
This parameter specifies the migration source volume numbers or names corresponding to an
already started migration. Details can be displayed using the "show migration" command. One
or more parameters can be specified at the same time. For details, refer to
.
The following example stops the RAID migration of volume #1:
CLI> stop migration -volume-number 1
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......