Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-iscsi-name
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
240
create host-iscsi-name
This command registers a host alias for the iSCSI (internet Small Computer System Interface) name and the IP
address used to identify an iSCSI-type HBA (Host Bus Adapter).
Only one iSCSI name can be specified at a time. The maximum number of available definitions depends on
the number of available host interface ports and the model. This command enables an alias to be used
instead of a long iSCSI name when mapping volumes to hosts.
The following three types of parameters are used for registering an iSCSI identifier:
1. -iscsi-name. This parameter is used to specify the name that corresponds to a HBA.
2. -alias-name. This parameter is used to specify an alias for the "-iscsi-name" parameter. This parameter is only used as a
user comment and is not used for control purposes.
3. -name. This parameter is used to specify the alias name. A unique name can be used.
■
Syntax
■
Parameter
create host-iscsi-name -iscsi-name
iscsi_name
[-alias-name
alias_name
]
[-ip-version {ipv4 | ipv6}] [-ip
ip_address
] -name
name
[-chap-user
chap_user
]
[-host-response-number
host_response_number
| -host-response-name
host_response_name
]
[-cmdsn-count {unlimited | 20 | 40 | 80 | 120 | 180}]
[-host-group-number
host_group_number
| -host-group-name
host_group_name
|
-new-host-group-name
new_host_group_name
]
-iscsi-name This parameter specifies the iSCSI name that corresponds to a HBA.
•
Between 4 and 223 alphanumerical characters, including hyphens (-), dots (.), and colons
(:), can be used.
•
"iqn." or "eui." must be added in front of the character string.
•
Characters are not case-sensitive.
-alias-name Optional. This parameter specifies an alias to the iSCSI name that corresponds to the "-iscsi-
name" parameter. A maximum of 31 alphanumeric characters can be used. Usable characters
are those given in the
"1.2.2 Keywords and Parameters" (page 19)
of the document overview.
Commas (,) cannot be used.
This name is not used for control purposes. It is only handled as a comment corresponding to
the iSCSI name.
-ip-version
Optional. This parameter specifies the IP address format for the host that is to be registered. If
omitted, it is handled as if "ipv4" is specified.
ipv4
IPv4 format
ipv6
IPv6 format
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
