Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show mapping
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
289
show mapping
This command displays a list of the mapping definitions of the volumes with host LUNs. Individual volumes or
host interface ports can be specified. This command cannot be used when Host Affinity Mode for the host
interface port is enabled.
■
Syntax
■
Parameter
■
Output
show mapping [-port {
xyz
|all}] [-volume-number
volume_numbers
| -volume-name
volume_names
]
-port
Optional. This parameter specifies the host interface ports. Two or more parameters can be
specified by separating them with a comma. If omitted, all the host interface ports are
displayed.
Example: -port 000,100
For details, refer to
"1.2.14 Host Interface Port Syntax" (page 25)
.
xyz
"x" is the controller module (CM) number, "y" is the CA number, and "z" is the host port
number.
Example: "123" indicates CM#1-CA#2-Host port#3
all
All the host interface ports (default)
-volume-number
or
-volume-name
Optional. This parameter specifies the volume identifiers. One or more parameters can be
specified. For details, refer to
"1.2.9 Volume Syntax" (page 22)
. If omitted, all the volume
identifiers are displayed.
# CM#0 CA#0 Port#0 (Host Affinity Mode Disable)
A B
# LUN Volume Status Size(MB)
# No. Name
# 100 1001 VOLUME_000000001 Available 32
C D E F G
A:
Host interface port
B:
Host affinity mode
C:
Logical unit number (LUN)
D:
Volume number
E:
Volume name
F:
Volume status
G:
Volume size
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
