Chapter 4 Function/System Settings and Display
4.3 Network Management > set email-notification
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
509
-partial-mode
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies the mode to divide e-mail into parts when sending. If omitted, the
existing setting is not changed. The default value is disabled (e-mails are not divided).
enable
Partial e-mail mode is enabled.
disable
Partial e-mail mode is disabled (default).
-partial-size Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies the part size of an e-mail. It is available when "-partial-mode" is enabled,
and any mode can be specified. Between 64kb and 6400kb should be specified for the value
(between 64KB and 6400KB). "kb" must be specified after the number. If omitted, the existing
setting is not changed. The ETERNUS DX Disk storage system default value is 64KB (the size of
each e-mail is 64KB).
-send-log
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether the E-mail log notification function is enabled or not. If omitted,
the existing setting is not changed. The default value is disable.
enable
Sending the E-mail log is enabled.
disable
Sending the E-mail log is disabled (default).
-iom-log
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether the I/O module logs are included. If omitted, the I/O module logs
are included.
enable
The I/O module log is included (default).
disable
The I/O module log is not included.
-customer-info
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether to include customer information in the exported logs. If this
parameter is omitted, customer information is included in the logs.
enable
Customer information is included in the logs (default).
disable
Customer information is not included in the logs.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......