Chapter 1 Overview
1.6 Viewing Command Help
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
29
1.6
Viewing Command Help
By inputting a question mark (?) after the CLI command name or the parameter name, a brief description can
be displayed. By using the "help" command, the command syntax can also be displayed. For further
information, refer to the
command.
1.7
Error Message Format
This section explains the CLI error messages format. When the CLI command ends normally, there is no output
on the terminal and the CLI prompt is returned to the next line. If an error occurs, an error message is
# If a question mark [?] is entered by itself, the entire verb list is displayed.
CLI> ?
copy - copy
create - create
delete - delete
discover - discover
exit - Exit the CLI sessions.
... (snip)
# If [s?] is entered, all the verbs beginning with "s" are displayed.
CLI> s?
set show start stop
# # If [show ?] is entered (note the space between the "show" and "?"), only the "show" command is
possible, so all the "show" command objects are displayed.
CLI> show ?
advanced-copy-licens - Display the Extended Advanced Copy license status.
advanced-copy-parame - Display the Advanced Copy parameters.
advanced-copy-policy - Display the currently registered Advance Copy policy.
advanced-copy-sessio - Display the list of Advance Copy sessions.
affinity-groups - Display a list of affinity groups or display the details of a specified affinity
group.
... (snip)
# If [show m?] is entered, all the "show" command objects beginning with "m" are displayed.
CLI> show m?
mapping migration
# If [create raid-group ?] is entered (note the space between the "create raid-group" and "?"), the
parameters that can be specified for the "create raid-group" command are displayed.
# Bracketed parameters are optional. All other parameters are required.
# Bracketed parameters are optional. All other parameters are required.
CLI> create raid-group ?
-name - Name of a RAID group
-disks - Disks to use in the RAID group
-level - RAID level
[-assigned-cm] - Assigned controller for the RAID group
# Long parameters and command names are truncated at 20 characters, as in the following example.
# Note that one or more spaces are required before a question mark.
CLI> ?
[-host-response-num - Host response numbers to display details
[-host-response-nam - Host response names to display details
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......