Chapter 3 Configuration Settings and Display
3.4 Volume Management > create flexible-tier-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
176
create flexible-tier-volume
This command creates a Flexible Tier Volume (FTV) in the specified Flexible Tier Pool (FTRP). Multiple FTVs can
be created in the same FTRP by using the "-count" parameter. This command has the same function as the
"create volume" command, except that an FTV is created in an FTRP.
■
Syntax
■
Parameter
create flexible-tier-volume -name
alias_name
{-ftrp-number
ftrp_number
| -ftrp-name
ftrp_name
}
-size
size
{tb|gb|mb} [-priority {
ftsp_numbe
r|auto}] [-count
count
] [-attention
attention
]
[-copy-protection {enable | disable}] [-volume-number
volume_number
]
-name
This parameter specifies the FTV name. Only one name can be specified. For details, refer to
"1.2.4 Alias Name Syntax" (page 20)
.
-ftrp-number
or
-ftrp-name
This parameter specifies the FTRP identifier to which the FTV that is to be created is allocated.
For details, refer to
"1.2.6 Flexible Tier Pool Syntax" (page 21)
.
-size
This parameter specifies the FTV size. Select whether terabytes (TB), gigabytes (GB), or
megabytes (MB) are used for the capacity.
Example: 1tb, 120gb, 512mb
-priority
Optional. This parameter specifies the FTRP number of the Flexible Tier Sub Pool (FTSP) to
which the FTV that is to be created is preferentially allocated.
If this parameter is omitted or "auto" is specified for this parameter, the allocated FTSP is
determined automatically.
-count
Optional. This parameter specifies the number of FTVs that are to be created. If omitted, only
one FTV is created with the name that is specified by the "-name" parameter.
When two or more is specified for the "-count" parameter, a sequential number starting from 0,
such as 0,1, and 2, is added after the FTV name that is specified by the "-name" parameter.
Example: When "-name abc -count 3" is specified, FTVs "abc0", "abc1", and "abc2" are created. If
these volumes already exist, the names of the created volumes use incrementing index
numbers.
-attention
Optional. This parameter specifies the threshold (Caution) for the FTV. A value between 1%
and 200% can be set. If omitted, the default value (10%) is set.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......