Fujitsu Eternus DX410 S2, Cli User'S Manual

Page: 227 / 756

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-wwn-name
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
227
create host-wwn-name
This command registers the host alias that corresponds to the WWN (World Wide Name) that identifies FC or
FCoE type HBAs (Host Bus Adapters). Only one WWN can be registered at the same time. The maximum
number of available definitions depends on the number of available host interface ports and the model type.
This enables the alias to be used instead of the numeric WWN when mapping volumes to host servers.
■ Syntax
■ Parameter
■ Example(s)
create host-wwn-name -wwn
wwn
-name
name
[-host-response-number
host_response_number
| -host-response-name
host_response_name
]
[-host-group-number
host_group_number
| -host-group-name
host_group_name
|
-new-host-group-name
new_host_group_name
]
-wwn This parameter specifies the WWN that corresponds to an HBA. The WWN is a 16-byte
hexadecimal number.
Example: -wwn 40000000abc80e38
-name This parameter specifies the host WWN alias. For details, refer to "1.2.4 Alias Name Syntax"
(page 20) .
-host-response-number
or
-host-response-name
Optional. This parameter specifies the host response identifier. Two or more parameters
cannot be specified at the same time. For details, refer to
"1.2.12 Host Response Syntax" (page
24) . If omitted, the existing setting is not changed.
-host-group-number
or
-host-group-name
Optional. This parameter specifies the host group number or the host group name. Only one
host group can be specified at the same time. For details, refer to
"1.2.16 Host Group Syntax"
(page 26) .
-new-host-group-name
Optional. This parameter specifies a new host group name. Only one host group can be
specified at the same time. For details, refer to
"1.2.16 Host Group Syntax" (page 26) .
The following example registers host alias "HBA1". The WWN
is "e000000000e0e000" and host response #1 is assigned:
CLI> create host-wwn-name -wwn e000000000e0e000 -name HBA1 -host-response-number 1