Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set advanced-copy-parameters
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
392
■
Example(s)
-ec-opc-priority
Optional. This parameter specifies the EC/OPC priority and the EC/OPC rate mode. The initial
value is "auto". If omitted, the existing setting is not changed.
auto
Automatically (default)
very-low
Very low priority
low
Low priority
middle
Middle priority
high
High priority
-warning
Optional. This parameter specifies the threshold value for Advanced Copy table usage. This
value is indicated by percent (%). The initial value is set to 80%. If omitted, the existing setting
is not changed. In addition, the system has a function that notifies users when this value
reaches the specified upper limit value. This upper limit value is set by using this parameter.
For details, refer to the "show event-notification" command.
-copy-schedule-mode
Optional. This parameter specifies the Copy Schedule Mode. If omitted, the existing setting is
not changed.
session-balancing
Session balancing is performed.
dst-rg-balancing
Destination RAID Group balancing is performed.
The following example sets up Advanced Copy parameters. The resolution is set to twice the default, the
table size is set to 128MB, and the EC/OPC priority is set to automatic mode.
CLI> set advanced-copy-parameters -resolution 2 -table-size 128 -ec-opc-priority auto
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......