Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-group
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
318
create host-group
This command creates host groups.
■
Syntax
■
Parameter
•
This command overwrites host responses that are set when the host is registered (when a host response
is not specified, "Default" is set for the host response).
•
Up to eight hosts can be set for a single host group.
•
Hosts that belong to a host group must have the same host response settings as the host group. When
the same hosts are registered in a new host group A and an existing host group B, the host response
settings for host group B are changed to the host group A settings. In addition, if the same hosts are
registered in host group B and another existing host group C, the host response settings for host group C
are also changed to host group B (and so forth).
create host-group -name
host_group_name
-host-type {fc | iscsi | sas} [-host-response-number
host_response_numbes
|
-host-response-name
host_response_name
]
{-host-number
host_numbers
| -host-name
host_names
}
-name
This parameter specifies a name of the port group. Only one name can be specified at the
same time. For details, refer to
"1.2.4 Alias Name Syntax" (page 20)
.
-host-type
This parameter specifies the host type. Only one host type can be specified at the same time.
fc
FC/FCoE
iscsi
iSCSI
sas
SAS
-host-response-number
or
-host-response-name
Optional. This parameter specifies the host response identifier that is to be used to set the host
sense. Only one host response can be specified at the same time. For details, refer to
Host Response Syntax" (page 24)
-host-number
or
-host-name
This parameter specifies the host identifiers to be associated. One or more parameters can be
specified at the same time. For details, refer to
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......