Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-sense
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
301
■
Example(s)
-converted-sk
Optional. This parameter specifies the sense key that corresponds to the sense of the
conversion destination. This parameter can only be specified when "-preset custom" is
selected. This parameter must be specified by using either a hexadecimal number or the
wildcard (*).
-converted-asc
Optional. This parameter specifies the sense code, which is an additional sense code that
corresponds to the sense of the conversion destination, This parameter can only be specified
when "-preset custom" is selected. This parameter must be specified by using either a
hexadecimal number or the wildcard (*).
-converted-ascq
Optional. This parameter specifies the sub sense code, which is an additional sense code
qualifier that corresponds to the sense of the conversion destination. This parameter can only
be specified when "-preset custom" is selected. This parameter must be specified by using
either a hexadecimal number or the wildcard (*).
The following example sets the preset host sense for ‘Linux’ to host response #1:
CLI> set host-sense -host-response-number 1 -preset linux
In the following example, the host sense that is set to host response #1 reverts to the default value:
CLI> set host-sense -host-response-number 1 -preset no-conversion
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......