Fuji Xerox Document Centre C250, User Manual

Page: 139 / 556

On-hook/Others
137
Fax
4
Private Polling (DTMF Method)
1
Display the [Basic Features]
screen. Select [Keyboard] to
display the keyboard on the touch
screen and enter the following
format.
2
Select [Polling] on the [On-hook/
Others] screen.
3
Select [On].
Note • Use the keyboard on the touch screen to enter symbols such as "!" and "
∗
." For information
about the character input, refer to "Entering Text" (P.252).
• Enter the password if necessary.
• This method is only available for transmission between machines of this model.
• The above dialing format can be registered in Address Number to enable private polling
using an Address Number. For information about Address Book registration, refer to
"Address Book" (P.334).
Storing for Polling (Allowing Remote Machines to Retrieve Documents
from Your Machine)
Storing for polling is to store a document on your machine so as a remote machine can
retrieve it from your machine. There are the following two storing for polling methods.
The machine can be set to automatically delete the documents for polling after transmission. For
information about the setting procedures, refer to "Doc for Polling - Auto Delete" (P.304).
„
Store for Polling
Store documents to be sent, in response to instructions received from remote
machines, in the Public Mailbox of the machine.
„
Store for Private Polling
Store documents to be sent, in response to instructions received from remote
machines, in the Private Mailbox of the machine. A Private Mailbox must be registered
on the machine. A document stored in the mailbox can be transmitted without others
seeing it if a password is set.
1
Select [Store for Polling] on the
[On-hook/Others] screen.
2
Select [Store for Polling].
Telephone number of
remote machine
Mailbox number of remote machine Password for mailbox of remote machine