![Fuji Xerox Document Centre C250 User Manual Download Page 456](http://html1.mh-extra.com/html/fuji-xerox/document-centre-c250/document-centre-c250_user-manual_2342090456.webp)
16 Problem Solving
454
Probl
em
So
lving
16
No
Cause
The document is not loaded correctly at the sender's
machine.
Action
Ask the remote station.
Note
•
Poor output quality may be caused by the
remote machine.
Image quality is not good.
Cause
The drum cartridge is damaged.
No
Action
If the copied image quality is also poor, replace the drum
cartridge.
Refer to "Replacing Drum Cartridges [A1], [A2], [A3],
and [A4]" (P.413).
Cause
Is the sender's document scanner portion clean?
Action
Ask the remote station.
Note
•
Poor output quality may be caused by the
remote machine.
Cause
Sender's resolution is too low.
Action
Ask the remote station.
Note
•
Poor output quality may be caused by the
remote machine.
A 1 page received
document is split into
multiple pages.
Cause
During scanning on the sender's side, for some reason the
document was scanned large.
Action
Auto Reduce on Receipt and Border Limit can be
combined on the machine for when documents, like those
described in the items on the left, are received. Depending
on the combination, a received document prints in the
following ways.
Refer to "Border Limit" (P.305), or "Auto Reduce on
Receipt" (P.305).
Auto Reduce
Receive
Page Split
Border Limit
Auto Reduce
Document
Received
Auto Reduce
No Documents
Received
When border
limits are
not exceeded
The document is
automatically
reduced and
printed as one
page.
The portion that
exceeds the set
page size is cut
off and the
document is
printed.
When border
limits are
exceeded
The document is printed at the
same magnification on separate
pages.
Summary of Contents for Document Centre C250
