Fuji Xerox Document Centre C250, User Manual

Page: 182 / 556

5 Scan
180
Scan
5
1
Select [Mixed Size Originals].
2
Select [On] or [Off].
„
Off
Select this when all documents are of the same size.
„
On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
Border Erase (Erasing Edges and Margin Shadows in the Document)
When you scan the document cover open or scan a book, black shadows sometimes
appear along the edges or center margin of the output scanned image. If this happens,
you can scan with the shadows erased.
Note • When making 2 sided scans, the same border erase amount is set to the top and back sides.
• When Reduce/Enlarge is set, the border erase amount is also enlarged or reduced
proportionately to the copy ratio.
1
Select [Border Erase].
2
Select [Normal] or [Variable Erase].
3
When [Variable Erase] is selected,
enter each erase value.
4
Select [Original Orientation].
„
Normal
The border erase amount is set to 2 mm for the top, bottom, left and right.
If you do not wish to perform border erase, set each [Variable Erase] value to [0mm].
„
Variable Erase
You can erase only the amount necessary.
„
T/B Erase
Shadows at the top and bottom of the document are erased. Edges on the top and
bottom are erased with respect to the direction that the document was loaded. The
border erase width can be set within the range 0 to 50 mm in 1 mm increments.
„
L/R Erase
Shadows on the left and right of the document are erased. Edges on the left and right
are erased with respect to the direction that the document was loaded. The border
erase width can be set within the range 0 to 50 mm in 1 mm increments.
„
Center Erase
Shadows in the center of documents such as booklets or documents with facing pages
are erased. The center erase width can be set within the range 0 to 50 mm in 1 mm
increments.