Fuji Xerox Document Centre C250, User Manual

Page: 540 / 556

18 Glossary
538
Glossa
ry
18
ROS Raster Output Scanner. A device for writing image signals to a
drum (light sensitive). A ROS is often referred to as a laser
beam scanner, etc.
Scan Documents are optically scanned to convert them to image
data.
The machine’s scan apparatus consists of the document
scanning glass and document feeder.
screen The screen of the touch screen. It provides user information
and instructions.
Select In this document, "Select" refers to touching a button on the
touch screen with your finger, or toggling a field.
Send Password Enter [S] and the ID of a remote terminal after the fax number
to specify a remote machine. This feature prevents
transmission errors.
Sender Originator of a communication. Is used in conjunction with
[Recipient].
Side Tray Feature that outputs copies to the side tray with the top facing
up.
SMTP SMTP stands for Simple Mail Transfer Protocol.
A communications protocol (an agreement governing the way
data is transmitted) commonly used for sending and receiving
mail.
Start Reservation Refers to setting a document, configuring a feature and
pressing the <Start> button immediately after power is turned
on. Once the device status is ready, copy begins
automatically.
Status Display Code Code indicating the device status. When an error occurs in the
machine, a status code is shown on the touch screen.
Store In this guide, used for storing a scanned document image in
memory.
Stored Programming By registering a series of operations, you can repeat the same
copy procedure with one press of the <Job in Memory> button.
Super G3 (SG3) A G3 communication system conforming to ITU V.34.
This system offers higher transmission speed (33.6 kbps) than
the normal G3 mode.
Transmission Interval Interval between the end of a transmission and the start of the
next send.
Transparency Copy Copy to transparencies, and insert a white sheet of paper
between each transparency copy.
Glossary Description