Fuji Xerox Document Centre C250, User Manual

Page: 467 / 556

Error Code
465
Probl
em
So
lving
16
016-716

[Cause] Unable to spool TIFF file, because of insufficient disk
space.
[Remedy] Remove unnecessary documents and users stored on
the printer, and then attach the hard disk. When
attaching a hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in Mailbox" (P.190).
016-721
 
[Cause] An error occurred during print processing. Probable
causes are as follows:
Printing was instructed by [automatic tray selection]
when [Paper Type Priority] is set to [Automatic Tray
switching Off] for all paper in the [Common Settings].
[Remedy] For 1, when printing by automatic tray selection, set one
of the paper types to a setting other than [Automatic Tray
switching Off] in [Paper Type Priority].
For 2, check print data.
Refer to "Paper Type Priority" (P.261).
016-726

[Cause] The print language cannot be automatically selected
when the print mode specified is set to [Auto].
Probable causes are as follows:
1 PostScript data was sent when the Post Script3 kit
(optional) is not installed.
2 LPR, etc. was used to send a PDF file directly to the
printer, which had a PostScript3 kit installed, but no
HDD kit.
[Remedy] For 1, the PostScript3 kit must be installed.
For 2, the HDD kit must be installed.
016-728

[Cause] An unsupported tag was included in the TIFF file.
[Remedy] Check the print data.
Refer to "Scan Options" (P.177).
016-729

[Cause] Unable to print because the number of colors/resolution
of the TIFF file exceeds the allowed range.
[Remedy] Change the number of colors/resolution for the TIFF file,
and specify the print data again.
Refer to "Scan Options" (P.177).
016-731

[Cause] Unable to print TIFF data because it was interrupted.
[Remedy] Retry printing.
016-732

[Cause] Unable to registered form specified by Emulation with
host.
[Remedy] Resend the form data.
016-735
 
[Cause] Attempted to print [Job Template List] while updating the
job template.
[Remedy] Retry printing after waiting for a period.
016-748
   
[Cause] Printing is not possible due to insufficient hard disk
space.
[Remedy] Reduce the number of pages of print data, for example,
by dividing up the print data or printing one copy at a
time when making multiple copies.
016-749

[Cause] A PJL command syntax error occurred.
[Remedy] Either confirm the print settings, or correct the PJL
command.
Error Code
Category
Cause and Remedy
C P F S M O