Replacing Consumables
413
Maintenance
15
9
Store the used cleaning rod with
the used waste toner container,
remove any air from the plastic
bag, and then close the zipper.
Important •
Be sure to place the used
waste toner container in the
special plastic bag that came
in the box of the new waste
toner container and zip the
bag closed. If the zipper is left
open, the toner may leak out
during disposal.
10
Hold the center section of the new
waste toner container and push the
container in as far as possible while
making sure that the center section
is properly aligned.
11
Close the black cover by pulling up
the left and right orange tabs.
12
Close the front cover.
Note
•
A message will be displayed and the machine will not operate if the front cover is even
slightly open.
Replacing Drum Cartridges [A1], [A2], [A3], and [A4]
When it is time to replace a drum cartridge, a message appears on the touch screen.
When this message appears, contact our Customer Support Center.
If you have concluded a spot maintenance contract, refer to this section, then confirm
the indicated drum cartridge position ([A1], [A2], [A3], or [A4]) and replace the
corresponding drum cartridge.
If you continue to use the machine without replacing the cartridge after the message
appears, the machine will stop and copying or printing will no longer be possible once
the following number of pages have been copied or printed.
z
In the Case of Document Centre C250
About 1,000 pages with yellow/magenta/cyan and about 1,100 pages with black.
z
In the Case of Document Centre C360
About 1,700 pages with yellow/magenta/cyan and about 1,800 pages with black.
z
In the Case of Document Centre C450
About 3,400 pages with yellow/magenta/cyan and about 3,800 pages with black.
Summary of Contents for Document Centre C250
