Fuji Xerox Document Centre C250 User Manual Download Page 296

Page: 296 / 556

11 Setups

294

Setu

Banner Sheet

Select whether to output banner sheets to separate different outputs.

Note

•

Even if the stapler feature is enabled, banner sheets are not stapled.

•

On a print job from a Macintosh, the document name does not appear on the banner sheet.

•

When printing banner sheets, they are counted for metering purposes.

Off

Do not print banner sheets.

Start Sheet

Print before a print job.

End Sheet

Print after a print job.

Start Sheet & End sheet

Print before and after a print job.

Banner Sheet Tray

Set the paper tray used for banner sheets.

Select from [Tray 1] to [Tray 4].

PostScript Default Color

Set the default values for AdobePS and PDF color mode.

Note

•

This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

PostScript Paper Supply

Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
not.

Note

•

This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

PostScript Font Absence

Set the handling when a PostScript font specified in a job is not present.

Note

•

This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

Cancel Printing

Cancel printing.

Substitute Font and Print

Continue printing, using a substitute font.

PostScript Font Substitution

When a PostScript font specified in a job is not present, set whether to use ATCx for
the substitute font.

Note

•

This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

Summary of Contents for Document Centre C250












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Document Centre C250

Reviews:

Brands by name

Popular brands

Fuji Xerox Document Centre C250, User Manual

Search results

Summary of Contents for Document Centre C250

Reviews:

Brands by name

Popular brands