Fuji Xerox Document Centre C250, User Manual

Page: 144 / 556

4 Fax
142
Fax
4
Fax Signal Method
1
Select an Address Number or group number to which a relay broadcast is registered
and press the <Start> button.
To perform Multiple Relay Broadcast, repeat this step.
DTMF Method
1
Select [Keyboard] to display the keyboard on the touch screen and enter the following
format.
2
Select [Next Recipient] to perform Multiple Relay Broadcast.
Note • You can specify up to 20 locations for relay recipients.
z Password
A pre-registered two-digit number.
Note • By default, no password is set. For setting a password, contact our Customer Support
Center. If a password has not been set, you do not need to enter one.
z Relay station ID
The last two digits of the initiating station Address Number registered at the relay
station.
z Address Number
An Address Number for the relay recipients registered at the relay station.
The wildcard "
∗
" can also be used.
Note • The above dialing format can be registered in Address Number to enable dialing using an
Address Number. For information about Address Book registration, refer to "Address Book"
(P.334).
F Code Method
When the machine is an initiating station, you can perform Relay Broadcast Send if the
F Code that has been set for the relay station and the password (if necessary) are
registered on the machine.
When the machine is a relay station, you can perform Relay Broadcast Send if the F
Code that has been set for the initiating station and the password (if necessary) are
registered on the machine.
Important • When performing Relay Broadcast Send with the F Code method, you can use a password if
you set a receive password for the relay station.
Note • When performing Relay Broadcast Send with machines of this model, we recommend using
the fax signal method.
• When using a machine of a different model as a relay station, confirm the F Code (sub-
address) and password of the target recipient machine.
When using the machine as a relay station, the F Code that is transmitted to the
initiating station is as follows.
Relay Broadcast
Send Print
directive Relay
station ID Address
Number Address
Number Address
Number
....
Up to 20 digits
Relay station
telephone
number
Relay
station
ID
Address
Number
Address
Number
Password