Fuji Xerox Document Centre C250, User Manual

Page: 306 / 556

11 Setups
304
Setu
ps
11
Transmission Report
Set the default value for [Report/Read Status] > [Transmission Report] in the [Send
Options] screen. Set whether a report for checking the transmission result is
automatically printed.
Send/Read Status
Set the default value for [Report/Read Status] > [Read Status (MDN)] in the [Send
Options] screen.
Set whether to request read status.
iFax Profile
Set the default value for [iFax Profile] in the [Send Options] screen.
Fax Control
Set the fax control settings.
1
Select [Fax Control].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Set the setting value.
4
Select [Save].
Send Header - Polling
Set whether to attach a send header to a polling document.
A "polling document" means that an original is stored in the machine's public mailbox
for polling, and can then be sent by an operation from the other end.
Doc for Polling - Auto Delete
Set whether polling documents should be automatically deleted after sending.
Rotate 90 degrees
If the original can be rotated and sent without reducing the original image, set whether
to automatically rotate.
Note • If an arbitrary magnification is specified in the multiple-up, scan specification feature, then
automatic rotation transmission does not feature.
Sender ID
For G3 communications, you can select whether to notify the G3-ID to the other party.
Redial Attempt
The redial feature automatically redials when the other party is busy, or does not
respond for any other reason. Set the number of redials from 0 to 9.
Note • In order to use this feature, it must first be enabled by a customer engineer.
Please note that this feature is not available in some countries.