Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 353 / 611

Configuration for Authentication
353
A
u
then
tic
a
ti
on a
nd
A
cc
o
u
nt
ing
F
e
at
u
res
13
Changing the Default Authorization Group Settings
Perform the following procedures to change the settings of the default authentication
group.
The settings changed here will be used as the default value of the authorization group for a
created user.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note •
The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select the group displayed as [DefaultGroup (Default)], and then select [Create/Delete].
8
Set each item.
For more information on the change of the authorization group, refer to "Create Authorization Groups" (P.248).
9
Select [Close] repeatedly until the [Tools] screen is displayed.
10
Select [Close].
Creating an Authorization Group
Perform the following procedures to add authorization groups, if necessary.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select a group displayed as [(No Name)], and then select [Create/Delete].
8
Enter a group name into [Group Name].
9
Set the other items.