Fresenius Kabi Agilia SP Technical Manual Download Page 7

Page: 7 / 306

1.4

Intended Users

1.5

Contraindications

1.6

Use Environment

The pump must only be used by qualified and trained healthcare professionals, including but not limited

to: nurses (primary users), physicians, nurse practitioners and physician assistants.

Service and maintenance must only be performed by biomedical engineers or technicians, or by IT

specialists.

Technical maintenance tasks (including inspections and checks) are performed by trained biomedical

engineers, or by dedicated medical rental and/or service organizations who have been trained and

approved by the manufacturer.

For training, contact your

Fresenius Kabi

sales representative.



While being serviced, the device must not be connected to a patient.



Do not modify the pump (except in the case of operations recommended by

Fresenius Kabi

For more information, refer to the Instructions for Use of the relevant pump.

Pumps must be used in the operating conditions (temperature, pressure, humidity and altitude) specified

in their Instructions for Use. Refer to the Instructions for Use of the relevant pump.

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands