49
7.7
Starting an Infusion
1.
Check the delivery path integrity, (syringe and access device).
2.
Check that there is no air in the syringe or in the extension set.
3.
Confirm that the syringe is correctly installed in the pump.
4.
Connect the syringe’s extension set to the patient's access device.
5.
Check the infusion settings prior to starting the infusion.
6.
Press
start
to start the infusion.
Warning
When connecting the syringe’s extension set to the patient's access
device, always use aseptic technique according to your healthcare
facility policy.
During programming and prior to starting an infusion, verify that the
syringe size and model on the syringe pump’s display screen matches
the syringe size and model loaded onto the syringe pump.
Information
If the syringe is not correctly positionned in the pump, we recommend
clamping, closing or disconnecting the extension set from the patient’s
access device.
Flow rate
Dose
Summary of Contents for Agilia SP
