Fresenius Kabi Agilia SP, Technical Manual

Page: 59 / 306

59
6.2.20 Test 25: Wi-Fi Module Information
Test Description
This test displays for information the Wi-Fi parameters saved on the pump. Run this test to
check that all parameters are correct.
If they are not, upload the Wi-Fi configuration to the pump using Agilia Partner maintenance
software.
Prerequisites

The pump must be equipped with Wi-Fi.
Information
When powering on a pump, it may take a few minutes for the Wi-Fi module information to refresh.
If some data are not displayed when performing this test, wait a few minutes for the pump to refresh Wi-Fi
module information (without powering off the pump), then run the test again.
If after a prolonged period where no information is displayed, contact your Biomed or IT service
department.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 25: Wi-Fi module information .
3. Press enter .
The following data is displayed for information:

Network SSID (Service Set IDentifier)

MAC address

IP address

Subnet mask address

Gateway address

RSSI: value in dBm

SNR: value in dBm

Data rate: value in Mbps.

Date and time of last connection to server

Version of Wi-Fi module application firmware

Version of Wi-Fi module Bootloader firmware

Version of Wi-Fi module Radio firmware
4. Press exit to return to the Tests screen.