Fresenius Kabi Agilia SP Technical Manual Download Page 136

Page: 136 / 306

136

Recycling

Before disposal, remove the battery from the device. Batteries and devices with this label must

not be disposed of with the general waste. They must be collected separately and disposed of

according to local regulations.

Information



For more information on waste processing regulations, contact your local

Fresenius Kabi

organization or the local distributor.



For more information on dismantling the device, refer to the chapter "Intervention Procedures" in this

document.



Follow healthcare facility policy regarding proper disposal after use.

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands