Fresenius Kabi Agilia SP, Technical Manual

Page: 292 / 306

144
23.4.4
Table 6 - Recommended Separation Distances Between
Portable and Mobile RF Communication Equipment and
Agilia pump
Information

Agilia pump and its accessories are intended for use in
electromagnetic environments in which radiated RF disturbances
are controlled.

Users of Agilia pump may prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile
RF communication equipment (transmitters) and Agilia pump as
recommended below, and according to the maximum output
power of the communication equipment (transmitters).

The device should not be used next to other equipment. If
adjacent use is necessary, observe the device to verify that it
operates normally in the configuration in which it will be used
(pump with a AC power cord, an RS232 cable).
Rated Maximum
Output Power of
Transmitter (W)
Separation Distance According
to Transmitter Frequency in Meters (m)
150 kHz to 80 MHz
D = 0.35

P
80 MHz to 800 MHz
D = 0.35

P
800 MHz to 2.5 GHz
D = 0.7

P
0.01 0.04 0.04 0.07
0.1 0.11 0.11 0.22
1 0.3 0.3 0.7
10 1.1 1.1 2.2
100 3.5 3.5 7
For transmitters rated at a maximum output power not listed above, the
recommended separation distance D in meters (m) can be estimated
using the equation applicable to the transmitter frequency, where P is
the maximum output power rating of the transmitter in watts (W) as
designated by the transmitter manufacturer.
Information

At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.

These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from
structures, objects and people.