Fresenius Kabi Agilia SP Technical Manual Download Page 241

Page: 241 / 306

10.2.2

Using the Communication Port

10.3

Communication via Wi-Fi

Remove the protective cap from the

pump’s RS232 communication port.

Connect the cable to the RS232

communication port by turning the

cable wheel.

Information

Do not disconnect communication cables while data is being transferred.

The Wi-Fi option allows the pump to connect to a hospital information

system without cables.

To know if your pump is equipped with a Wi-Fi module, check for the

presence of the Wi-Fi logo on the pump’s keypad.

See section 3.4.1, page 17.

To activate or deactivate the Wi-Fi module, see section 9.3, page 94.

For more information on the Wi-Fi module, refer to the technical manual.

Information

Wi-Fi pumps can be configured with Wi-Fi module enabled or disabled.

Wi-Fi pump

Non Wi-Fi pump

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands