30
5.3.3
Using on a Flat Table
5.3.4
Attaching Two Pumps Together
1.
Fold the pole clamp up: see section 5.2.2.2, page 28.
2.
Place the pump far enough from the
table's edges to prevent it from
accidentally being pushed off.
You can attach two pumps together either for transport, or before fixing
them to a pole.
1.
Fold both pumps’ pole clamps up: see
2.
Slide the slot on the bottom of the
upper pump onto the handle of the
lower pump.
3.
Turn the attachment lock knob on the
lower pump handle clockwise until the
locked symbol lines up with the
marker.
4.
Make sure the two pumps are
securely attached together.
5.
If needed, fold the two pole clamps
down and secure them tightly to the
pole.
Symbol
Location
Description
Attachment Lock Knob
Locked Position
Attachment Lock Knob
Unlocked Position
Summary of Contents for Agilia SP
