Fresenius Kabi Agilia SP, Technical Manual

Page: 50 / 306

50
6.2.9 Test 8: Battery Info
Test Description
This test provides information about battery usage time, voltage output, current output, and
temperature.
Run this test to check that the battery data is correct.
The battery capacity is acceptable.
If this test fails:

Connect the pump to an AC power supply to charge the battery.

Run the test again. If the test fails, replace the battery.
See section 8.1, page 79.
Required Tools and Equipment

No specific tools or equipment are required
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 8: Battery info .
3. Press enter .
4. Press the arrow keys to scroll through the information screens
.
The following data is displayed:

Duration : Battery operating time in hours, days and months

Cycles : Number of charge/discharge cycles, equivalent to Duration (in
hours) divided by 7

Since : Date of the first use on battery

Conversion and Voltage : Voltage value at the battery terminals in V, and
conversion into mV

Conversion and Temperature : Battery temperature in °C, and conversion
into LSB

Conversion and Current : Battery charge/discharge current in mA, and
conversion into LSB
5. Check that the displayed values are within the limits shown in the table below.
Value Limits
Voltage 5.0 V to 8.7 V
Current - Connected to an AC power supply, battery being charged
(battery charge status indicator is flashing) -135 mA to -165 mA
Current - Connected to an AC power supply, battery fully charged
(battery charge status indicator is lit permanently) -50 mA to +50 mA
Current - Pump running on battery
(battery charge status indicator is off) -50 mA to -200 mA
Temperature +2 °C to +48 °C (+35.6 °F to +118.4 °F) for normal
room temperatures
6. Press exit to return to the Tests menu.