Fresenius Kabi Agilia SP, Technical Manual

Page: 291 / 306

143
Notes:

At 80 MHz and 800 MHz, the highest frequency range applies.

These guidelines may not apply to all situations. Absorption and reflection from structures, objects and people may
affect the electromagnetic propagation.

(a) Field strengths from fixed transmitters, such as base stations for radio (cell / cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcasts and TV broadcast cannot be predicted theoretically
with accuracy. To access the electromagnetic environment due to the fixed RF transmitters, an electromagnetic
site survey should be considered. If the measured field strength in the location where Agilia pump is used exceeds
the applicable RF compliance level above, Agilia pump should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such as reorienting or relocating Agilia pump, or
installing magnetic shielding.

(b) Over the frequency range of 150 kHz to 80 MHz, field strengths should be less than 10 V/m.
Radiated RF
IEC 61000-4-3 3 V/m
80 MHz to
2.5 GHz
- - - - - - - - - - - - - -
10 V/m
80 MHz to
2.5 GHz
10 V/m D = 0.35

P,
for a frequency of 80 MHz to 800 MHz
D = 0.7

P,
for a frequency of 800 MHz to 2.5 GHz
P is the maximum output power rating of
the transmitter in Watts (W) according to
the transmitter manufacturer, and D is the
recommended separation distance in
meters (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey (a), should be less than compliance
level (b).
Interference may occur in the vicinity of
equipment marked with the following
symbol:
Immunity Test
IEC 60601-1-2
- - - - - - - - - - - - - -
Compliance
Level
Obtained by
the Device
Electromagnetic Environment -
Guidance
IEC 60601-2-24
and ANSI/AAMI
ID26
Test Level