Feig Electronic ID ISC.LRU3000, Manual

Page: 10 / 193

OBID i-scan
®
UHF Manual ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH Page 10 of 193 H90202-7e-ID-B.docx
2. Revision History of Document
Revision Date Page Description
1e 06.09.10 Initial revision
2e 28.07.11
26, 32, 33 Data Clock Interface as Scan Mode Interface
38 CFG3: RF-Interface, New Parameter “DC-Power”
45 CFG4: Transponder Parameter, New Parameter “TID-Length”
109 CFG85: Linux System Tools
113 [0x8A] Read Configuration
116 [0x8B] Write Configuration
118 [0x8C] Reset Configuration
191 Annex D: Discontinued Protocols for Reader Configuration
3e 26.08.11
55 CFG11 Read Mode – Read Data, New Parameter, “Read_Complete_Bank”
155 [0xB0][0x23] Read Multiple Blocks, New Mode, “Read_Complete_Bank”, More-Data
4e 28.10.11
32, 33 CFG1 Interface & Mode – Corrections to Data Clock Interface
38 CFG3 RF-Interface – Definition of new Regions for automatic frequency setup
47 CFG5 Anticollision – Elimination of Q - Value
68 CFG15 Antenna Multiplexing – Elimination of Mux Valid Time
6e 11.06.12
167 [0x25] Block Permalock
170 [0x26] Read Permalock Status
7e 02.11.12
35 CFG2: Namespaces added
38 CFG3: FCC Frequencies corrected
45 CFG4: New Parameter “Write-Option”
55 CFG11: Read Complete Bank in dependency of DB-ADR
137 [0x6E] Reader Diagnostic, new Mode 0x21
155 [0x23] Read Multiple Blocks, Read Complete Bank in dependency of DB-ADR
159 [0x24] Write Multiple Blocks, Bytes added in case of error code
163 [0x18] Kill, Recommissioning Bits added