OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 103 of 193
H90202-7e-ID-B.docx
and selected in
7.11. CFG12: Read Mode - Filter
, are notified always immediate-
ly. If host-triggered is enabled, the notification is activated by host command and
all collected data, input and status events are notified together. For detailed mes-
sage conditions, see
. The message format is described in
11. Protocols for Buffered Read Mode and Notification Mode
ACK: (OperatingMode.NotificationMode.Transmission.Enable_Acknowledge)
Acknowledge Notification
b0:
Notification must not be acknowledged
b1:
Notification must be acknowledged with protocol [0x32] Clear Data Buf-
fer
TIME-TRIGGERED-TIME: (Operating-
Mode.NotificationMode.Transmission.TimeTriggeredTime)
Defines the cycle time in time-triggered mode.
max. time period
TIME-TRIGGERED-TIME
0...255 * 1s
DATA-SETS-LIMIT: (OperatingMode.NotificationMode.Transmission.DataSetsLimit)
Defines the maximal number of data sets in each notification. This parameter is helpful for
communication lines with reduced capacity or low grade quality like GPRS.
For compliance with previous configuration settings, a 0x00 means a maximum of 255 and
each other value defines a new maximum.
KEEP-ALIVE:
Mode for keepalive notification.
Bit
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
0
0
EN
EN: (OperatingMode.NotificationMode.Transmission.KeepAlive.Enable)
b0:
disabled
b1:
enabled
