Feig Electronic ID ISC.LRU3000, Manual

Page: 121 / 193

OBID i-scan
®
UHF Manual ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH Page 121 of 193 H90202-7e-ID-B.docx
9.2. [0x63] RF Controller Reset
This protocol allows you to reset the RF Controller.
Host
→
Reader
Byte 1 2 3 4,5
Contents 5 COM-ADR [0x63] CRC16
Host
←
Reader
Byte 1 2 3 4 5,6
Contents 6 COM-ADR [0x63]
STATUS
15
CRC16
NOTE:
The RF-field will be switched off after a “RF Controller Reset”
Commands issued after a [0x63] command must be delayed with at least 300 ms, otherwise
the reader will respond with status [0x0F] busy. In that case the host should repeat the
command later
.
15
see ANNEX C: Index of Status Bytes