Feig Electronic ID ISC.LRU3000, Manual

Page: 122 / 193

OBID i-scan
®
UHF Manual ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH Page 122 of 193 H90202-7e-ID-B.docx
9.3. [0x64] System Reset
This protocol allows you to reset the ACC and the RF Controller.
Host
→
Reader
Byte 1 2 3 4 5,6
Contents 6 COM-ADR [0x64] Mode CRC16
Host
←
Reader
Byte 1 2 3 4 5,6
Contents 6 COM-ADR [0x64]
STATUS
16
CRC16
MODE:
Defines Controller which will be reset.
MODE Controller
0 RF Controller
1 ACC
NOTE:
The RF Controller will be reset after the ACC runs a start up process.
Commands issued after a [0x64] command in Mode 1 must be delayed with at least 300 ms,
otherwise the reader will respond with status [0x0F] busy. In that case the host should re-
peat the command later.
A reset of the ACC can last up to 30 seconds.
16
see ANNEX C: Index of Status Bytes