Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 79 / 198

Operation
BOMAG 79 MPH 122-2
Returning the brake to normal condi-
tion
Fig. 166
l
Turn the lever on hydraulic hand pump (Fig.
166) to the left.
l
Operate the ball valve back to initial position
and turn the locking screw back in.
4.23 Transport
!
Danger
Danger of accident! Life hazard!
During demonstration and when loading the
machine no persons should be in the danger
zone of the machine.
Use only stable loading ramps of sufficient
load bearing capacity.
Make sure that persons are not endangered by
the machine tipping or sliding off.
Always switch the rotor off.
Always switch to transport range "I" to drive
the machine onto the transport vehicle.
Lash the machine down, so that it is secured
against rolling, sliding and turning over.
Always use shackles on the lifting points for
loading or tying the machine down.
Check all lashing points for damage before
lashing down the machine.
Lifting the machine is not permitted.
For transport by ship use a flat container with
collapsible front and rear walls, so that the ma-
chine can be driven onto the container.
Loading weight: see chapter "Technical data".
!
Caution
Always pre-select the travel speed range at
standstill. Travel lever in position 0 and park-
ing brake applied.