Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 46 / 198

Indicators and Controls
BOMAG 46 MPH 122-2
Fig. 59
No. 52 = Control panel for bitumen dosing sys-
tem
*
a = Main switch control light
Lights yellow when system is
switched on
b = Main switch
To switch the system on/off
c = Compressor switch
To switch the compressor on/off
d = Selector switch foam bitumen/emul-
sion
**
e = Burner control light
Lights green with the burner switched
on
f = Burner switch
To switch the burner on/off
g = Lack of thermal oil warning light
Lights red if the thermal oil pressure
is too low
Check the thermal oil level
h = Temperature gauge for binder tank
Display in °C
i = Display of binder flow rate
Display in l/min
j = Display of reaction water flow rate*
Display in l/min
k = Selector switch Spraying/Circulation
l = Potentiometer reaction water flow
rate*
m = Potentiometer binder flow rate
n = Switch spray sections
To switch the individual spray sec-
tions on/off
* Optional equipment
** not with emulsion system