Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 116 / 198

Every 10 operating hours
BOMAG 116 MPH 122-2
ing cutters, see chapter "Replacing milling
cutters/milling cutter holders".
Fig. 219
l
After the test turn the rotary switch for free-
wheeling of rotor (a) (Fig. 219) back to position
"Left".
Fig. 220
l
Remove bolt (4) (Fig. 220) from the tailgate
and insert it into the cab securing rod.
l
Close the tailgate.
6.11 Check the tire pressure
!
Danger
Danger of bursting!
Take care of the air pressure when inflating
tires. Excessive pressure causes the risk of
bursting!
!
Caution
Mitas tires
*
are filled with a water/anti-freeze
mixture water. You should therefore always
check the tire pressure with the tire valve in
top position!
Always close the valves with their dust caps.
Ensure equal pressure in both tires on one ax-
le.
Fig. 221
l
Check the front and rear tire pressure (Fig.
221), correct if necessary.
* Optional equipment
Tire manufacturer Front/rear tire pressure
in bar
Good Year 2.6/1.6
Michelin 2.6/2.0
Mitas* 3.5/3.5