Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 34 / 198

Indicators and Controls
BOMAG 34 MPH 122-2
Fig. 25
No. 15 = 12 V-socket
12 V vehicle voltage when main battery switch is
switched on
Fig. 26
No. 16 = Water flow meter
*
outer scale = l/min
inner scale = gal/min
Fig. 27
No. 17 = Instrument cluster - machine func-
tions
i
Note
With the ignition switch in position "I" all gauges
and instruments are switched on for 3 seconds.
a red = Charge pressure warning light rotor I
Lights if the charge pressure on rotor
I is too low, the warning buzzer
sounds, the engine is shut down after
approx.2 minutes.
b red = Charge pressure warning light rotor II
Lights if the charge pressure on rotor
II is too low, the warning buzzer
sounds, the engine is shut down after
approx. 2 minutes.
c red = Warning light fault water injection/
lack of water
Lights in case of a fault in the water
injection or a lack of water.
Checking the water supply, cleaning
the water filter
d red = Warning light water in fuel filter
Lights when the water content in the
fuel pre-cleaner reaches the sensor
contacts.
Clean the water separator.
e yellow = Control light power limit control active
f red = Warning light ESX fault
* Optional equipment