Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions

Page: 54 / 198

Operation
BOMAG 54 MPH 122-2
i Note
The ignition switch is designed with a re-start lock.
For a new starting attempt the ignition key must
first be turned back to position "0".
l
Once the engine is running switch on a power-
ful consumer (working light, etc.).
!
Caution
If no powerful consumer is switched on volt-
age peaks may occur when separating the con-
necting cables between the batteries, which
could damage electrical components.
l
After starting disconnect the negative poles
(ground cable) first and the positive poles af-
ter.
l
Switch off the consumer.
i
Note
Run the engine warm for a short while.
4.5 Driving the machine to work
!
Danger
Danger of accident!
Wet and loose soils considerably reduce the
ground adhesion of the machine on inclina-
tions and slopes.
Soil conditions and weather influences impair
the gradability of the machine.
Do not drive up inclinations that exceed the
maximum gradability of the machine.
Always give way to loaded transport vehicles!
Apply the parking brake before leaving the
seated position or dismounting the machine.
i
Note
Both travel levers are mechanically coupled and
perform identical movements.
Fig. 80
l
Set the engine speed potentiometer (Fig. 80)
to position "MAX" (full load).