Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 75 / 198

Operation
BOMAG 75 MPH 122-2
Fig. 152
i
Note
The control light "Rotor turns" (i) in the instrument
cluster for machine functions (Fig. 152) goes out.
l
Lift the rotor to end position and the open tail-
gate completely.
l
Clean the machine thoroughly, especially the
rotor and the side boxes of the rotor hood.
l
Shut the engine down, refer to the correspond-
ing section.
l
Check the cutting teeth, replace if necessary,
see corresponding section.
4.21 Raising/lowering the cabin
i
Note
Under normal conditions the cabin only needs to
be lifted for repair work!
Fig. 153
l
Disconnect the water hose (1) (Fig. 153).
l
Unscrew fastening screws (2) from the cabin.
Fig. 154
l
Turn the lever on hydraulic hand pump (Fig.
154) to the right.
!
Caution
On machines with ROPS platform raise the
cabin only to the first possible locking posi-
tion.
l
Operate the hydraulic hand pump, until the
correct height for inserting the support rod is
reached.