Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 112 / 198

Every 10 operating hours
BOMAG 112 MPH 122-2
Environment
Catch running out fuel, do not let it seep into
the ground.
l
Shut down the engine.
Fig. 206
l
Clean the area around the filler opening (Fig.
206).
l
Unscrew the fuel tank cover.
!
Caution
Contaminated fuel can cause malfunction or
even damage of the engine.
If necessary, fill in fuel through a funnel with
screen.
l
Top up with fuel (diesel or winter diesel).
l
Screw the fuel tank cover back on.
6.8 Checking the hydraulic oil
level
!
Caution
In hydraulic systems filled with Panolin HLP
Synth.46 use always the same oil to top up.
With other ester based oils consult the lubrica-
tion oil service of the respective oil manufac-
turer.
!
Caution
If, during the daily inspection of the oil level
the hydraulic oil level is found to have
dropped, check all lines, hoses and compo-
nents for leaks.
Fig. 207
l
Check the hydraulic oil level in the inspection
glass (Fig. 207).
i
Note
At a room temperature of approx. 20 °C the oil lev-
el should reach approx. 2/3 way up the inspection
glass.
l
If the oil level is too low top up hydraulic oil im-
mediately.
For quality and quantity of oil refer to the "table
of fuels and lubricants".