Fayat Group Bomag MPH 122-2, Operating & Maintenance Instructions, Page: 137 / 198

Every 500 operating hours
BOMAG 137 MPH 122-2
Every 500 oper ating hours
6.33 Changing engine oil and oil
filter cartridge
!
Danger
Danger of scalding!
When draining off hot oil.
By hot oil when unscrewing the engine oil fil-
ter.
!
Caution
Drain the oil only when the engine is warm.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Environment
Catch running out oil and dispose of environ-
mentally together with the oil filter cartridge.
Fig. 268
l
Unscrew the cap from the oil drain socket (Fig.
268).
l
Drain off and catch the engine oil.
l
Screw the cap back on after the oil has run out.
Fig. 269
l
Loosen and unscrew the engine oil filter car-
tridge (Fig. 269) using an appropriate filter
wrench.
l
Wipe the sealing face clean.
l
Cover the rubber seal of the new engine oil fil-
ter slightly with clean oil.
l
Spin the new engine oil filter cartridge on and
tighten it hand tight.
Fig. 270
l
Fill in new engine oil (Fig. 270) through the oil
filler neck.
l
Screw the cap back on again.
l
Perform a short test run and check the oil level
on the dipstick, correct the oil level as neces-
sary.