config debug-trace igmp-snooping
ExtremeWare Software 7.0.0 Command Reference Guide
1497
config debug-trace igmp-snooping
config debug-trace igmp-snooping <debug level>
Description
This command records debug information to the system log.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
the messages recorded at lower levels.
Example
The following command sets the reporting level for igmp-snooping errors to 4:
config debug-trace igmp-snooping 4
Following is the log output at this level:
<INFO:SYST> msm-a-console admin: configure debug-trace igmp-snooping 5 vlan all
<DBUG:IGMP> IGMPS: igmpSnoopingDataInput L2 switch data (trunk6/224.0.0.13/15.1.6.3)
<DBUG:IGMP> IGMPS: addRouterEntry trunk6: port 1:1 raddr=15.1.6.3 rp=-2039713300
<DBUG:KERN> <--- End of chain (86499000) --->
<DBUG:KERN> 0x0886499046: 00 14 00 04 3c 59 6d f3 00 00 00 00 ****<Ym*****
<DBUG:KERN> 0x0886499036: 06 03 e0 00 00 0d 20 00 35 2f 00 01 00 02 00 69 ******
*5/*****i
<DBUG:KERN> 0x0886499026: 08 00 45 c0 00 26 3d 70 00 00 01 67 86 30 0f 01
**E**&=p***g*0**
<DBUG:KERN> 0x0886499016: 01 00 5e 00 00 0d 00 01 30 0a 7e 00 81 00 e2 58
**^*****0*~****X
<DBUG:KERN> m0 @ 0x86499000: Length=60 m_off=22 m_data=0x86499016
<DBUG:KERN> <--- Start of chain (86499000) --->
<DBUG:IGMP> IGMPS: igmpSnoopingDataInput L2 switch data (trunk4/224.0.0.13/15.1.4.2)
<DBUG:IGMP> IGMPS: addRouterEntry trunk4: port 8:1 raddr=15.1.4.2 rp=-2039722596
<DBUG:KERN> <--- End of chain (86498700) --->
debug level
Specifies a debug level:
0 —
None.
1 —
Records warning messages, such as a memory shortage or invalid ptag.
2 —
No additional information recorded.
3 —
Records informational messages, such as deleting a sender, aging out an entry,
or disabling IGMP snooping.
4 —
Displays a dump of each IGMP and data packet.
5 —
No additional information recorded.
Summary of Contents for ExtremeWare 7.0.0
