manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 513 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 513

 

config log display

ExtremeWare Software 7.0.0 Command Reference Guide

513

config log display

config log display {<severity>}

Description

Configures the real-time log display.

Syntax Description

Default

If not specified, only critical, alert, and emergency severity messages are sent to the syslog host.

Usage Guidelines

You must enable the log display before you can configure the log display. Use the 

enable log 

display

 command to enable the log display. This allows you to configure the system to maintain a 

running real-time display of log messages on the console.

Options for displaying the real-time log display include:

•

severity—Filters the log to display messages with the selected severity or higher (more critical). 
Severities include emergency, alert, critical, error, warning, info, notice, and debug. 

Example

The following command configures the system log to maintain a running real-time display of log 
messages of alert priority:

config log display alert

History

This command was first available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

severity

Specifies a message severity. Severities include emergency, alert, critical, 
error, warning, info, notice, and debug.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments