manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 958 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 958

 

958

ExtremeWare Software 7.0.0 Command Reference Guide

IGP Commands

config rip updatetime

config rip updatetime {<seconds>}

Description

Specifies the time interval in seconds within which RIP sends update packets. 

Syntax Description

Default

30 seconds.

Usage Guidelines

The router exchanges an update message with each neighbor every 30 seconds (default value), or if 
there is a change to the overall routed topology (also called triggered updates). The timer granularity is 10 
seconds.

Example

The following command sets the update timer to 60 seconds:

config rip updatetime 60

History

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

seconds

Specifies a time in seconds.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments